The perfect ‘no frills’ charger for beginners and club modellers alike.

Capable of charging Li-Po, Li-Fe, Nimh, Nicad, and Lead Acid batteries from 0.1 to 4.5A with balancing for the relevant Lithium technology plus Delta peak for Nimh and Nicad. That’s a 1-4S Li-Po/Fife, a 1-10S Nimh/Nicad or a 6-12v Lead acid. The internal circuitry is limited to 45W and the current is automatically limited to prevent exceeding this, if the selected current is higher.

Balancing accuracy is 5mv per cell (Lithium) and delta Peak accuracy 8mv for Nicad and 5mv for Nimh.

Input power can be DC (11-15v) or AC (100-240v), making the choice of power very flexible, depending on whether you are at home or at the field/track/lake. It is fully protected for current overload and reverse output polarity.

The outer case is fully metal for durability and a ‘quality’ look/feel.

Supplied with a special multi plug balance adaptor board compatible with XH, TP, EH and PQ plugs on the one board. There is no need to buy another board to have full compatibility with all Lithium balance connectors. One main output lead is provided with a male ‘T’ connector on it already, making the Sigma EQ Mini easy to use with many of the ARTF models now on the market.


Specifications
Weight: 230g
Dimensions: 110 x 83 x 39mm

Source: Ripmax

Share →
Buffer

One Response to Ripmax Sigma EQ Mini AC/DC Charger

  1. Don Hargrove says:

    Made a couple returns the my local hobbie store. I thought this charger was defective. I used the manual step by step. page 9 I believe has a typo. It reads 2. to start the charging process. that was it. I took it to my hobby store, they said I had to press and hold the button on the charger. No where in the manual says that.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>